Alarm Setting; Alarm Value On/Off - Fuji Electric FE ZSS Instruction Manual

Select "Alarm Setting" from the "Menu" screen, and press the
select the measurable component by moving the
Press the key after measurable component is selected. "Alarm Setting" screen is displayed.
NT
Alarm Setting Gas
HC ℓ

6.3.1 Alarm value ON/OFF

ON validates the High/Low limit alarm output setting, alarm display, alarm record for the measured concen-
tration. Select OFF to invalidate.
Note
When ON is selected, "High/Low limit setting", "Analog Output / Alarm Record" cannot be set.

Alarm Setting

H - Limit
L-Limit
Hysteresis
Analog Output
Alarm Record
INZ-TN1ZSS-E
6.3 Alarm setting
50.00
Range1 ppm
30.00
Range2 ppm
ON
Range1 10.00 ppm
00.00
Range2 ppm
15 %FS
Range2 H-Limit
( )
key. On the "Alarm Setting Gas" screen,
NT
with the key and the
Alarm Setting
H-Limit
L-Limit
NT
Hysteresis
Analog Output
Alarm Record
Point the to "H-Limit" or "L-Limit" by the
key and the
key.
- 39 -
key.
Range1 50.00 ppm
Range2 30.00 ppm
ON
10.00 ppm
Range1
00.00 ppm
Range2
15
%FS
Range2 H- Limit
key, and press the