Preface - Fuji Electric FE ZSS Instruction Manual

We thank you very much for purchasing Fuji Electric's cross-stack laser gas analyzer (Type: ZSS).
• First read this instruction manual carefully until an adequate understanding is acquired.
Then proceed to installation, operation and maintenance of the laser gas analyzer. Improper
handling may result in an accident or a failure.
• The specifications of the laser gas analyzer may be changed without prior notice for further
product improvement.
• Modification of the laser gas analyzer is strictly prohibited unless a written approval is obtained
from the manufacturer. We will not be responsible for any accident attributable to such remod-
eling without permission. If it becomes necessary to modify the laser gas analyzer, contact the
manufacturer in advance.
• This instruction manual shall be stored by the person who actually uses the laser gas analyzer.
• After reading the manual, be sure to keep it at a place easy to access.
• This instruction manual should be delivered to the end user without fail.
Manufacturer:
Type:
Date of manufacture: Described in nameplate on main frame
Product nationality:
• Transcription of a part or the whole of this manual without
permission is prohibited.
• The contents of this manual are subject to change without
prior notice.
INZ-TN1ZSS-E

PREFACE

Fuji Electric Instrumentation Co., Ltd.
Described in nameplate on main frame
Japan
Request
© Fuji Electric Systems Co., Ltd. 2007
- i -
Issued in November, 2007