Name And Function Of Each Part; Flowmeter Unit (Fsz); Dedicated Cable (Flyf) - Fuji Electric FSZ Instruction Manual

1.4. Name and function of each part

1.4.1. Flowmeter unit (FSZ)

No. Name
(1) Dedicated cable
connector connection port
(2) LED display unit
(3) Diagnostic indicator lamp
(LED)
(4) Flow direction (LED)
(5) UP key
(6) DOWN key
(7) Entry key
(8) Fixing bracket
(9) Fixing screws (x 4)

1.4.2. Dedicated cable (FLYF)

Connection name
Power supply
Analog current output
Digital output 1
Digital output 2
Unused
Key
This is a wire connection port for the power supply, current output, and
contact output.
It displays the flow rate and settings.
It displays normal (green) and abnormal (red) flow measurements.
It displays the flow direction.
△ Selects items, numeric values, and symbols.
▽ Selects items, numeric values, and symbols.
○
Enters a selection or registers a setting.
It is a metal fixing bracket for installing the main unit to the piping.
These are screws for fixing the main unit and metal fixing bracket.
(5) Gray (GRY) ________ (+) 20 to 27.5 V DC
(8) Red (RED) _________ (-)
(3) Green (GRN) _______ (+) 4 to 20 mA
(2) Brown (BRN) _______ (-)
(4) Yellow (YEL) _______ (+) 27.5 V DC max.,
(8) Red (RED) _________ (-) 0.1 A max.
(6) Pink (PNK) _________ (+) 27.5 V DC max.,
(8) Red (RED) _________ (-) 0.1 A max.
(7) Blue (BLU) _________ NC (RESERVED)
(1) White (WHT) _______ NC (RESERVED)
(8) Red (RED) _________ (GND)
- 3 -
Description
Wiring