Zero Calibration; Span Calibration; Replacement Of Packing; Light Axis Adjustment - Fuji Electric FE ZSS Instruction Manual

7.3 Zero calibration

Refer to "6.1 Zero calibration".

7.4 Span calibration

Refer to "6.2 Span calibration".

7.5 Replacement of packing

Replace the packing, referring to the following figure.
Replace the receiver packing and silicon packing C every two years.
eceiver unit Transmitter unit
Silicon packing A
O-ring Angle adjustment unit

7.6 Light axis adjustment

Refer to "4.7 Angle adjustment" and "4.11 Adjustment of light quantity".

7.7 When the device is not used for a long period

If the device is attached to the stack without performing air-purge for a long period, parts such as the receiver
and transmitter units might be damaged. When you do not use if for a long period, detach the device from the
stack and keep it in a place not exposed to high temperature and risk of corrosion.
- 65 -
INZ-TN1ZSS-E