Table of Contents
Advertisement
Output Hold
ＨＣ ℓ
Pre-set
Setting Range
"Last Meas." : Holds the value for which "Last Meas." is determined by the
"Pre-set"
: Holds the %FS value for which range is currently validated. Previous set value is kept held
even if the range is switched during the hold.
Example) When range is from 0 to 10ppm, and the set value is 20%FS, the value corre-
O
Conversion Hold
2
"Last Meas." : Holds the measurement value for which "Last Meas." is determined by the
the value calculated by O
by the fixed value. Even if O
value which is determined by the
"Pre-set"
: Holds the value calculated by %FS value of the currently enabled range and O
O
value is the same as the last value.
2
Last Meas. of average value
When the average value output is selected and "Last Meas." is clicked, the averaged value is kept holding
until determined by the
2007-4-1
12:00:00
020
%FS
sponding to 2ppm is output regardless of the measurement value.
value. When the O
2
analog input is entered, it holds the value calculated by O
2
NT
key.
- 46 -
value is fixed, it holds the value calculated
2
NT
key.
NT
key.
NT
key, and
2
value. The
2
INZ-TN1ZSS-E
Advertisement
Table of Contents
