Table of Contents
Advertisement
5.3.1.4 "Menu" screen
(1)
(2)
Alarm Log
(3)
Alarm Setting
(4)
Output Hold
(5)
ODE
Press the
key while the "Measurement" screen is displayed, and the "Menu" screen appears. (It does
not appear when pressing the
display the "Measurement" screen, and then press the
5.3.1.5 Name (functions)
(1) Zero Calibration ··················· Used when zero calibration is performed.
(2) Span Calibration··················· Used when span calibration is performed.
(3) Alarm Log···························· Displays the alarm occurred in the past.
(4) Alarm Setting ······················· Used for setting range of upper/lower limit alarm or analog output range
(5) Output Hold ························· Used for holding analog output.
(6) Parameter Setting ················· Used for setting each parameter.
(7) Display / Output setting ······· Used for setting the measurement value and analog output value to be
(8) AO Select ····························· Used when analog input range or fixed value are set for concentration
(9) Input Signal·························· Used to determine what to output to the analog output terminal.
INZ-TN1ZSS-E
Menu
Zero Calibration
Span Calibration
ODE
key while other screen is displayed. In that case, Press the
of the measurement value.
displayed on the "Measurement" screen such as switching "Instantane-
ous value / Average value" or "Wet / Dry".
correction or air purge alarm.
Parameter Setting
Display／Output
Input Signal
AO Select
Password
ODE
key.)
- 27 -
2006-04-01
12:00:00
(6)
(7)
(8)
(9)
＊＊＊＊＊
5+
key to
Advertisement
Table of Contents
