Paper Jam Inside Machine; Paper Jam Top Of Duplex; Paper Jam Bottom Of Duplex - Samsung Xpress M288 Series Service Manual

Mono laser mfp
Hide thumbs Also See for Xpress M288 Series:
Table of Contents

Advertisement

► Error Code
M2–1110
► Error message

Paper Jam inside machine

► Symptom
A paper jam was detected at the feed sensor.
► Troubleshooting method
1) Remove the jammed paper. If the error persists, check the followings. (Refer to 4.1.3 Jam removal)
2) Check if the feed/regi sensor connector is connected properly.
3) Check if the regi./feed actuator works normally. If it is defective or broken, replace it.
► Error Code
M2–2110
M2–2310
► Error message

Paper Jam top of duplex

Paper Jam bottom of duplex

► Symptom
A paper jam was detected in the duplex area.
► Troubleshooting method
1) First, remove the jammed paper. (Refer to 4.1.3 Jam removal)
2) Check if the paper in tray is loaded properly. Adjust the guide. Check the machine setting is normal for paper.
3) Check if the Guide-Change Duplex of the rear cover is defective or broken. Check if the rib form of the rear
cover is normal.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4. Alignment and Troubleshooting
4-38

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl-m2880fwSl-m2885fwXpress m2885fwXpress m2880fw

Table of Contents