Joint Sub Pba - Samsung CLX-9350ND Service Manual

3.4.6 Joint sub PBA

Perform the following procedure to remove the Joint S
1. Remove the rear cover. (3.4.3)
2. Remove the holder with Joint PBA after removing 2. Remove the holder with Joint PBA after removing
4 screws and 2 connectors.
3.4.7 FAN
P f Perform the following procedure to remove the Fan from th f ll i
1. Remove the rear cover. (3.4.3)
2. Remove the holder with Joint PBA (3.4.6 2.)
3. Remove the Fan housing [A] after removing 3 screws
4. Remove the FAN (with long-shaped tool like screw d
CAUTION
Please attach "OUT" label on the replacement FAN to
Service Manual
CLX-9250/9350 series
3. Replacemen
d t th F
[A]
"OUT" label
nt Procedures
Sub PBA from the Scan Unit
3. Remove 3 screws.
f m the Scan Unit. th S U it
s.
driver) after removing 4 screws and 1 connector.
match the direction and location on the original fan.
3-2 20
SAMSUNG ELECTRONICS