Logic Trigger - Owon XDS3204E User Manual

Holdoff
Holdoff
Reset

Logic Trigger

Trigger according to logic relation.
In Logic Trigger mode, the trigger setting information is displayed on bottom right of
the screen, for example,
trigger type is Logic, logic mode is AND, CH1 high level and trigger level is 0.00mV,
CH2 high level and trigger level is 0.00mV.
Logic Trigger menu list:
MENU SETTING
Mode Logic
AND
Logic
Mode XNOR
XOR
CH1
Input Mode CH2
Goes True
Goes False
Is True >
Out Mod
Is True <
Is True =
4.Advanced User Guidebook
100 ns - 10 s, turn the M knob or click
time interval before another trigger occur, press
cursor to choose which digit to be set.
Set Holdoff time as default value (100 ns).
INSTRUCTION
Set vertical channel trigger type as Logic trigger.
Set logic mode as AND.
OR Set logic mode as OR.
Set logic mode as XNOR.
Set logic mode as XOR.
Set CH1 as High Level, Low level, high or low level,
Rise and Fall.
Set CH2 as High Level, Low level, high or low level,
Rise and Fall.
：
Note When input mode of one channel is set as Rise or
Fall, the other channel could not be set as Rise and Fall
at the same time.
Trigger when condition turns True from False.
Trigger when condition turns False from True.
Trigger when the time of true condition is more than
the set time
Trigger when the time of true condition is lower than
the set time
Trigger when the time of true condition is equal to the
set time
panel button or click
50
to set
to move
， indicates that