Deleting A Program - Dürkopp Adler 878-M PREMIUM Operating Instructions Manual

Settings via the software
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
3. Press OK to load the program number.
Or:
Select another program number using 
program number using the keypad keys 0 - 9 and then press
OK.
 The program number is loaded.
The following display appears, with the program number
flashing:
Fig. 41: Display after specifying the program number
4. Load the desired changes into the new program.
5. Press the ESC key.
 The controller exits Programming mode and reverts to Auto-
matic mode.
5.6.8

Deleting a program

The selected program is deleted.
1. Press the
 The softkey menu appears.
Fig. 42: Softkey menu
2. Press the
3. Press the ESC key.
 The controller exits Programming mode and reverts to Auto-
matic mode.
key.
key.
 or input a
/
65