Dürkopp Adler 878-M PREMIUM Operating Instructions Manual page 92

90
Adjusting the information displayed in the status bar
To adjust the appearance of the status bar:
1. Go to Settings (see above).
Fig. 60: Setting up the user interface (4)
(4) - Screen configuration
2. Go to Screen configuration (4) and press on Manual
mode - Status bar configuration (5).
 The interface used for configuring the status bar opens.
Fig. 61: Setting up the user interface (5)
3. Press and hold the desired symbol and drag it to move it into
or out of the status bar.
4. Press to return to Settings or
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
(5) - Status bar configuration
to return to Manual mode.
④
⑤