Installing The Knee Switch - Dürkopp Adler 878-M PREMIUM Operating Instructions Manual

158

8.11 Installing the knee switch

Fig. 82: Installing the knee switch
(1) - Knee switch
(2) - Connecting cable
1. Screw the knee switch (1) in front of the oil sump firmly in place
under the table top.
2. Guide the connecting cable (2) to the back between the oil
sump and the control unit.
3. Insert the plug (3) of the connecting cable in the socket of
the control unit.
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
1
2
3
(3) - Plug
Setup