Settings via the software
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
4. Select another program number using
number using the keypad keys 0 - 9 and then press OK.
The following information is shown on the display,
the P in the program number field flashes:
Fig. 37: Programming display
5. Press the upper softkey.
The following table shows the individual symbols on the display
and the functions of the keys on the control panel.
Symbol
Meaning
Auto Forward
Value range: on/off
Add section
Delete section
Number of current program to be created
No function assigned
Current section
• Use
• Use
• Press the OK key to edit other parameters for the
section,
Stitch length for the current section
Value range: 0.0 to 7.0 mm
• Use
• Use
/
to select the Section parameter.
/
to switch to the next/previous section.
5.6.4 Editing programs, str. 60.
/
to select the Stitch length parameter.
/
to change the stitch length.
or input a program
/
57