60
5.6.4
Editing programs
1. In Automatic mode, press the P key.
The controller switches to Edit mode.
The program previously selected can now be edited.
The following information is shown on the display, and the P
in the program number field flashes:
Fig. 38: Display in Edit mode
1. Use
and
/
section.
The selected section is shown bold in the program bar.
2. Use
to select the parameter to be changed for the respec-
/
tive section, and use
3. Use
to add a new section.
4. Use
to delete a section.
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
to select the program to be edited and the
/
to change it.
/
Settings via the software