Dürkopp Adler 878-M PREMIUM Operating Instructions Manual page 138

Icon Parameter
Positioning of the needle
Position of the needle when sewing
stops.
Sewing foot lift at stop
Height of sewing foot lift at
stop
Backwards
When the parameter is activated, the
section is sewn backwards.
Center guide
(only on 2-needle machines, optional
additional equipment)
Puller
(optional additional equipment)
The feed dog supports the transport of
the sewing material. The feed of the
two rollers is calculated automatically
based on the stitch length of the
machine. An adjustment may be
necessary depending on the
application.
The rollers of the feed dog can be
adjusted separately. The input is in
percent: a positive value increases the
roller feed while a negative value
reduces the feed.
Gap
(optional additional equipment)
The edge guide helps to precisely
position the sewing material. The value
set indicates the distance between the
needle and edge guide/material edge.
136
Settings
Value range
On/Off
Value range
On/Off
Value range
00 to 13 [mm]
(depending on subclass)
Value range
On/Off
Value range
On/Off
On/Off
Correction top roller
Value range
-100 - 100 [%]
Correction bottom roller
Value range
-100 - 100 [%]
Value range
01.0 - 45.0 [mm]
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021