Table of Contents
Advertisement
162
Information
Another option is to assemble the ball socket (4) on the tabletop
using a chipboard screw.
This requires that you pre-drill the hole in the tabletop to prevent
damage to the tabletop surface.
10. Switch on the machine.
Ä
The control panel is recognized by the control. The first ini-
tialization can take up to 15 minutes - do NOT switch off
the machine!
11. The machine is ready for operation when the Commander
Basic/Pro user interface is visible.
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
Setup
Advertisement
Table of Contents
