Copying/Deleting A Seam Pattern Sequence (C) - Dürkopp Adler 513 Operating Instructions Manual

Programming
Operating Instructions 513/533 - 01.0 - 09/2023
4.5.4

Copying/deleting a seam pattern sequence (C)

You can copy registered seam patterns (P) - as well as seam
pattern sequences (C) - to new seam patterns (P). You can also
delete existing seam patterns (P) or seam pattern sequences (C)
(except for the last seam pattern sequence (C)).
To copy/delete a seam pattern sequence (C):
1. Switch on the machine.
2. Press the
 The system menu appears:
Fig. 39: Copying/deleting a seam pattern sequence (1)
3. Use the
menu item.
4. Press the
5. Press the
pattern sequence number - or use the symbol
the seam pattern sequence (C).
6. Press the
7. Confirm to create a new seam pattern sequence (C).
button.
buttons to select the 06 Reg/del C pat
button to confirm.
buttons to move or copy the new seam
buttons to select the
to delete
symbol.
53