Fitting The Oil Extraction Line; Fitting The Tilt Sensor - Dürkopp Adler 878-M PREMIUM Operating Instructions Manual

Setup
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021

8.9 Fitting the oil extraction line

Fig. 80: Fitting the ooil extraction line
1
(1) - Tube of the oil extraction line
1. Tilt the machine head.
2. Screw the filter (2) into the oil sump with the plastic adapter
to the right.
3. Insert the tube of the oil extraction line (1) into the plastic
adapter.

8.10 Fitting the tilt sensor

Fig. 81: Fitting the tilt sensor
(1) - Tilt sensor
1. Tilt the machine head.
2. Place the tilt sensor (1) into the groove in the table top.
3. Screw the tilt sensor (1) with two screws (2).
2
(2) - Filter
(2) - Screws
①
②
157