Setting The Segment End Parameters - Dürkopp Adler 878-M PREMIUM Operating Instructions Manual

Icon Parameter
Sewing foot lift at stop
Height of sewing foot lift at
stop
Light barrier
(optional additional equipment)
The light barrier detects the beginning
and the end of the material. After a
signal was detected, sewing can
continue automatically with the
specifically set parameters.
Icon Parameter
Parameter Seam End
Sewing foot lift after trim
Height of sewing foot lift after
trim
Thread trimmer
108
6.5.6 Setting the
There are various options for setting the Segment End
parameters. The following table lists all possible options.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
Settings
Value range
On/Off
Value range
00 to 13 [mm]
(depending on subclass)
Value range
On/Off
(see  p. 138)
parameters
Segment End
Settings
Value range
On/Off
Value range
00 to 13 [mm]
(depending on subclass)
Value range
On/Off