Dürkopp Adler 878-M PREMIUM Operating Instructions Manual page 108

Icon Parameter
Catch bartack
To ensure a safe sewing start and
complete sewing of the start bartack, an
additional bartack can precede the start
bartack.
Only the number of forward and
backward stitches can be selected.
The stitch length cannot be set
individually – it corresponds to the stitch
length of the normal start bartack.
First bartack section
st
The 1
programmed with a different number of
stitches. All subsequent sections have
the preset number of stitches from the
settings for the start bartack.
Last bartack section
The last section of the bartack can be
programmed with a different number of
stitches. All previous sections have the
preset number of stitches from the
settings for the end bartack.
Invert bartack direction
Normally, a bartack starts either with
the sewing direction (forwards – even
number of sections) or against the
sewing direction (backwards – odd
number of sections), depending on
the number of sections.
Setting this parameter inverts the
sewing direction of the bartack.
106
section of the bartack can be
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
Settings
On/Off
Number of stitches backwards
Value range
01 to 50
Number of stitches forward
Value range
01 to 50
Number of bartack sections
Value range
01 10
On/Off
Number of stitches
Value range
01 to 50
On/Off
Number of stitches
Value range
01 to 50
Value range
On/Off