Fitting The Control Panel; Assembling The Op3000 - Dürkopp Adler 878-M PREMIUM Operating Instructions Manual

Setup
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021

8.12 Fitting the control panel

8.12.1 Assembling the OP3000

Fig. 83: Fitting the control panel
①
②
(1) - Control panel
(2) - Connecting cable plug
1. Screw the control panel (1) firmly onto the control panel bracket
(3).
2. Insert the plug (2) of the connecting cable in the socket of the
control panel (1).
8.12.2 Assembling the Commander Basic/Pro
Fig. 84: Assembling the Commander Basic/Pro (1)
(1) - Control panel bracket
(2) - Countersunk screws
(3) - Control panel bracket
① ②
(3) - Ball head
③
③
159