Table of Contents
Advertisement
Setup
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
4.
Slip the clip (7) over the ball head (3).
5.
Press the ball head (3) into the ball socket (4), allowing it to
slightly gyrate.
Fig. 87: Assembling the Commander Basic/Pro (4)
(4) - Ball socket
(7) - Clip
6.
Slide the clip (7) onto the ball socket (4).
7.
Tighten the wing screw (8).
Fig. 88: Assembling the Commander Basic/Pro (5)
⑨
⑩
(9) - Control panel Commander
Basic/Pro
8.
Tighten the Commander Basic/Pro control panel (9) to
the control panel holder using the screws (10).
9.
Insert and tighten the cable at the Commander Basic/Pro
control panel (9).
⑧
⑦
④
(8) - Wing screw
(10) - Screws
161
Advertisement
Table of Contents
