154
8.7 Controller
8.7.1
Fitting the control unit
Fig. 77: Fitting the control unit
1
(1) - Strain relief
1. Screw the control unit (2) onto the 4 screw holders (3) under the
table top.
2. Clamp the power cable of the control unit (2) into the strain
relief mechanism (1).
3. Screw the strain relief mechanism (1) under the table top.
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
3
2
(2) - Control unit
(3) - Screw holder
Setup