Using Automatic Mode - Dürkopp Adler 878-M PREMIUM Operating Instructions Manual

Icon Parameter
Last bartack section
The last section of the bartack can be
programmed with a different number of
stitches. All previous sections have the
preset number of stitches from the settings
for the end bartack.
Invert bartack direction
Normally, a bartack starts either with the
sewing direction (forwards – even number
of sections) or against the sewing direction
(backwards – odd number of sections),
depending on the number of sections.
Setting this parameter inverts the sewing
direction of the bartack.
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021

6.6 Using Automatic mode

Automatic mode is comprised of all stored programs.
To access the Automatic mode:
1. Press the symbol
 This opens the navigation interface.
Fig. 64: Using Automatic mode (1)
(1) - Automatic mode
Settings
On/Off
Number of stitches
Value range
01 to 50
Value range
On/Off
to bring up the navigation pane.
①
111