Dürkopp Adler 878-M PREMIUM Operating Instructions Manual page 136

Icon Parameter
First bartack section
st
The 1
programmed with a different number of
stitches. All subsequent sections have the
preset number of stitches from the
settings for the start bartack.
Last bartack section
The last section of the bartack can be
programmed with a different number of
stitches. All previous sections have the
preset number of stitches from the
settings for the end bartack.
Invert bartack direction
Normally, a bartack starts either with the
sewing direction (forwards – even number
of sections) or against the sewing
direction (backwards – odd number of
sections), depending on the number of
sections.
Setting this parameter inverts the sewing
direction of the bartack.
134
section of the bartack can be
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
Settings
On/Off
Number of stitches
Value range
01 to 50
On/Off
Number of stitches
Value range
01 to 50
Value range
On/Off