Table of Contents
Advertisement
160
To assemble the Commander Basic/Pro control panel:
1.
Screw the ball head (3) to the control panel holder (1) using
2 countersunk screws (2).
Fig. 85: Assembling the Commander Basic/Pro (2)
(4) - Ball socket
(5) - Washer
2.
Place the arm cover ( Service Instructions).
The arm cover is tightened by only 3 screws.
3.
Screw the ball socket (4) to the arm cover using washer (5)
and screw (6).
Fig. 86: Assembling the Commander Basic/Pro (3)
④
(3) - Ball head
(4) - Ball socket
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
⑤
④
(6) - Screw
(7) - Clip
Setup
⑥
⑦
③
Advertisement
Table of Contents
