Dürkopp Adler 878-M PREMIUM Operating Instructions Manual page 126

124
Menu item
Software /
Stitch Counter
In Software mode,
the bobbin is
monitored by the
software based on
the number of
stitches sewn.
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
Setting 1
Counter Type
4 different counters can be
applied. The following 3 sub-
items can be set for each of
the counters.
Counter value
Bobbin supply capacity in
stitches. This is a very
variable value, which
depends on the size of the
bobbin and the thickness of
the thread.
Sewing stop
Sewing stops and a notice is
shown on the display when
the bobbin is detected to be
nearly empty. If the parameter
is not activated, only the
LEDs on the machine arm
give a warning if the bobbin is
empty.
Sewing foot lower
position
Reset necessary
It is only possible to resume
sewing after changing the
bobbin and confirming the
message on the control
panel.
Setting 2
Value range
A/B/C/D
Value range
00000 to 99999
Value range
On/Off
Value range
On/Off
Value range
On/Off