Dürkopp Adler 878-M PREMIUM Operating Instructions Manual page 132

130
Options for setting the Needle thread tension parameter
Menu item Setting 1
linear Needle thread
tension
Value range
00 to 99 [%]
Min. Material
thickness
Value range
00.0 to 10.0 [mm]
Max. Material
thickness
Value range
00.0 to 10.0 [mm]
2. Value On/ Min. Material
Off thickness
Value range
00.0 to 10.0 [mm]
2. Value On Min. Material
thickness
Value range
00.0 to 10.0 [mm]
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
Setting 2
Maximum needle thread
tension reached at the
upper material thickness
limit.
Material thickness at
which the increase in
needle thread tension
should start.
Material thickness up to
which the increase in
needle thread tension
should occur.
Material thickness from
nd
which the 2 needle
thread tension should be
used.
Material thickness from
nd
which the 2 needle
thread tension should be
used.