Symbols Used; Figures - Dürkopp Adler 878-M PREMIUM Operating Instructions Manual

1.
2.
etc.

 Reference to another section in these instructions.
6

1.5 Symbols used

Proper setting
Indicates proper setting.
Malfunctions
Specifies the faults that can occur due to an incorrect setting.
Steps to be performed when operating the machine (sewing
and equipping)
Steps to be performed for service, maintenance, and
installation
Steps to be performed via the software control panel
The individual steps are numbered:
1. First step
2. Second step
The sequence of the steps must always be followed.
Result of performing an operation
Change to the machine or on the display
Important
Special attention must be paid to this point when performing a step.
Information
Additional information, e.g. on alternative operating options.
Sequence
Specifies the work to be performed before or after a setting.
References

1.6 Figures

Depending on the submodel, the appearance of the machine
varies in the following items:
Length of the machine arm, number of adjusting wheels, position
of the stitch adjustment lever, presence of the keypad, etc.
When this makes no difference to the handling steps, the figures
show only one machine version as an example.
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
About these instructions