Christie HS 2K Series Service Manual page 86

3. Remove the main board bottom shielding.
See Removing the rear cover
4. Remove the rear cover.
See Removing the rear cover
5. Remove the front cover.
See Removing the front cover
6. Remove the left-side cover.
See Removing the left-side cover
7. Remove the right-side cover.
See Removing the right-side cover
8. Remove fan 7.
See Replacing fan 7
9. Remove the blue laser driver board.
See Replacing the blue 1 and 2 laser driver board
10. Remove the red laser driver board.
See Replacing the red laser driver board
11. Remove the power supply module.
See Replacing the DC 12V power supply
page 76.
12. Remove the color wheel.
See Replacing the color wheel
13. Remove the four M2.6 screws with a Phillips Jewelers screwdriver securing the combiner
module.
HS Series 2K Service Manual—DWU1612-HS, DWU2022-HS
020-001790-01 Rev. 1 (03-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
on page 59.
on page 59.
on page 61.
on page 63.
on page 62.
on page 69.
on page 74,
on page 84.
on page 100.
on page 102.
Replacing the main power supply
Optics
on
86