Christie HS 2K Series Service Manual page 71

8. Unplug the fan connector to the DC 12V power supply.
9. Remove the fan harnesses from the clips.
10. Remove the two M3 screws with a Phillips #1 screwdriver securing fan 8.
11. Separate the fan and fan bracket.
12. Replace the fan 8.
13. To re-install the fan modules, follow these steps in reverse order.
HS Series 2K Service Manual—DWU1612-HS,DWU2022-HS
020-001790-01 Rev. 1 (03-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
Ventilation and cooling
71