Christie HS 2K Series Service Manual page 64

See Removing the top cover
front cover on page 61,
side cover on page 63.
2. Remove the main board module.
See Replacing the main board
3. Remove the main board bottom shielding.
See Removing the rear cover
4. Remove the I/O board.
See Removing the I/O board
5. Remove fans 4, 5, and 6.
See Replacing fans 4, 5, and 6
6. Remove fan 7.
See Replacing fan 7
7. Remove the laser driver board.
See Replacing the blue 1 and 2 laser driver board
driver board on page 102.
8. Remove the power supply module.
See Replacing the DC 12V power supply
page 76.
9. Remove the light engine.
See Replacing the light engine
10. Remove the pump and radiator module.
See Replacing the combiner and radiator module
11. Remove the AC inlet.
See Removing the AC inlet
12. Remove the elevator feet from the bottom cover.
See Replacing a projector's foot
HS Series 2K Service Manual—DWU1612-HS,DWU2022-HS
020-001790-01 Rev. 1 (03-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
on page 59, Removing the rear cover
Removing the right-side cover
on page 94.
on page 59.
on page 99.
on page 68.
on page 69.
on page 74,
on page 85.
on page 79.
on page 65.
Projector covers and feet
on page 59,
on page 62, and
on page 100, Replacing the red laser
Replacing the main power supply
on page 89.
Removing the
Removing the left-
on
64