Verify Power Connection - Christie HS 2K Series Service Manual

Verify power connection

Is the power cord connected
securely at the projector and at
Is the power source providing
Is the interlock switch closed?
Measure the JLVPS0 pin5-6 on
the main board is output 5V?
Replace the main board and the
HS Series 2K Service Manual—DWU1612-HS,DWU2022-HS
020-001790-01 Rev. 1 (03-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
Verify power
connection.
No
the power source ?
Yes
AC voltage?
No
Yes
No
Yes
No
Yes
keypad board.
No fault found
End
Properly connect the power cord at
The projector and AC power source
Supply AC voltage (100-120V or
200-240V)
Ensure the interlock switch is in
the closed position
Replace the LVPS
Troubleshooting
No
45