Christie DWU1612-HS Technical Reference
  1. Manuals
  2. Brands
  3. Christie Manuals
  4. Projector
  5. DWU1612-HS
  6. Technical reference

Christie DWU1612-HS Technical Reference

Serial commands
Hide thumbs Also See for DWU1612-HS:
Table of Contents

Advertisement

Quick Links

Download this manual
Technical Reference
020-103352-01
DWU1612-HS/DWU2022-HS
Serial Commands

Advertisement

Table of Contents
loading

Related Manuals for Christie DWU1612-HS

Summary of Contents for Christie DWU1612-HS

  • Page 1 Technical Reference 020-103352-01 DWU1612-HS/DWU2022-HS Serial Commands...
  • Page 2 The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.

  • Page 3: Table Of Contents

    Content Communicating with DWU1612-HS/DWU2022-HS......7 Connecting to the projector RS232 IN port........7 Connecting to the projector Ethernet port.
  • Page 4 LMS–Lens Memory Save Current Position........40 DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 5 SIF–Secondary Source Information........60 DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 6 ZOM–Zoom............73 DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 7: Communicating With Dwu1612-Hs/Dwu2022-Hs

    Communicating with DWU1612-HS/DWU2022- Understand the information and procedures for communicating with DWU1612-HS/DWU2022-HS from a remote location. You can communicate with the projector through the RS232 IN port or the Ethernet port. When connecting the projector to a computer, use a direct connection. Docking ports can cause software upgrade failures.

  • Page 8: Correct Command Formatting

    For example, PWR1 can be entered as PWR 1. Understanding message format Commands sent to and from DWU1612-HS/DWU2022-HS are formatted as simple text messages consisting of a three letter command code, an optional four letter subcode, and optional data. Source...

  • Page 9: Error Messages

    If a command cannot be performed, a descriptive error identifying the problem appears. For example, the following message indicates a syntax error: (ITP) - (65535 00000 ERR00005 "ITP: Too Few Parameters") DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 10: Serial Api Commands

    Serial API commands The DWU1612-HS/DWU2022-HS commands can be used to modify product settings. ADR–Projector Address Sets or queries the device address. This command also helps to identify where a response or asynchronous message originates from. Generally, this command is used for projectors that are daisy-chained together using the RS232 style communication.

  • Page 11: Apw-Auto Power On

    4 = Activates auto shutdown after 20 minutes 5 = Activates auto shutdown after 25 minutes 6 = Activates auto shutdown after 30 minutes DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 12: Awf-Auto Warp Filter

    Examples Disable automatic applying of a preset warp filter: (AWF 0) Enable automatic applying of a preset warp filter: (AWF 1) BAC–Backup Restore Saves and restores DWU1612-HS/DWU2022-HS settings to and from a backup file. Commands Command Description Values BAC+REST Restores the DWU1612-HS/DWU2022-HS —...

  • Page 13: Bdr-Baud Rate

    Selects a gamma correction curve. 0 = Video input 1 = Film input 2 = Bright content 3 = Computer input (CRT) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 14: Bld-Apply Blend Settings

    Saves the geometry correction after doing 1 to 4 = Saves geometry correction to one blending. of four blend settings 1 (Default) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 15: Bog-Blue Gain

    BOO <value> Sets the blue offset value. 0 to 100 50 (Default) Examples Set the blue offset value to 50: (BOO 50) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 16: Brt-Brightness

    Defines the hue of each primary color component (red, green, blue, and white). Commands Command Description Values CCA+BLUG <value> Specifies the blue levels of gain. 0 to 254 127 (Default) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 17 1= Turns on automatic test patterns (Default) CCA+MRTD Resets the magenta color settings to their — defaults. DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 18 Set the red level of hue to 120: (CCA+REDH 120) Turn on automatic test patterns for HSG adjustments: (CCA+MHTP 1) Set the wall color to white: (CCA+WALL 1) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 19: Cci-Color Temperature

    Turn on the ceiling mount setting and turns the image upside down: (CEL 1) Automatically adjust the image orientation to the projector position: (CEL 2) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 20: Clr-Color

    Applies a top right horizontal adjustment, in pixels. 0 to 120 0 (Default) CNR+TRCY <value> Applies a top right vertical adjustment, in pixels. 0 to 80 0 (Default) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 21: Con-Contrast

    0 = Auto For RGB: 1 = RGB Full (Default) 2 = RGB Limited For YUV: 3 = REC709 (Default) 4 = REC601 DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 22: Cwi-Wheel Index Setting

    Set the color wheel speed to twice the current value: (CWS 0) Set the color wheel speed to three times the current value: (CWS 1) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 23: Def-Factory Defaults

    100 (Default) the set value. The higher the value, the larger the range to adjust the light source. DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 24: Drb-Real Black

    50 = Centers the display area horizontally (Default) 100 = Moves the display area to the extreme right Examples Center the display area horizontally: (DSH 50) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 25: Dsv-Digital Vertical Shift

    If the display area has been resized with this setting, use the DSH–Digital Horizontal Shift and DSV– Digital Vertical Shift commands to readjust the image. DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 26: Dzv-Digital Vertical Zoom

    0 to 200 pixels blend. 0 (Default) EBL+BTMW <value> Sets the height of the bottom edge blend. 4 to 500 pixels DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 27 Set the left edge blending starting point to 150 pixels: (EBL+LFTS 150) Set the top blend height to 200 pixels: (EBL+TOPW 200) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 28: Err-Error Log

    Displays information for fan 9. (Read-only) — FAN+FA10? Displays information for fan 10. (Read-only) — Examples Display the information for the fan 5: (FAN+FA05) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 29: Fcs-Focus

    Sets the value to correct asynchronous displaying of 1 to 200 (by timing) images for 3D blending. 1 (Default) Examples Set the frame delay to 100: (FDY 100) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 30: Fkc-4K Compatible

    Displays the firmware information such as software version, LAN version, formatter version, and so Commands Command Description Values FVI? Displays the firmware information. — DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 31: Gog-Green Gain

    GOO <value> Sets the green offset value. 0 to 100 50 (Default) Examples Set the green offset value to 50: (GOO 50) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 32: Gor-Rgb Gain/Offset Reset

    0 = Turns off high altitude functionality for altitudes functionality. >/= 2000 m (Default) 1 = Turns on high altitude functionality for altitudes below 2000 m DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 33: Hks-Hot Key Settings

    Returns the horizontal position value on the main video. (Read- — only) HOR <value> Sets the horizontal position for the main image. 0 to 100 50 (Default) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 34: Hpc-Horizontal Pincushion

    Returns communications information in read-only mode. Commands Command Description Values ICI? Displays the current settings for the communication information. — Examples Return the communication information: (ICI?) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 35: Ili-Light Source Info

    (IRC+FRNT 1) Disable the sensor from the HDBaseT box: (IRC+HDBT 0) Disable the signal from the top IR sensor: (IRC+TOPP 0) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 36: Itp-Test Pattern

    2 = Stays backlit for 20 seconds 3 = Stays backlit for 30 seconds 4 = Keeps the keypad constantly backlit 5 = Disables the backlight feature DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 37: Key-Key Mode Emulator

    (Default) projector installations. 1 = Locks the zoom, focus, horizontal, and vertical lens motors Examples Center the lens: (LCB+HOME 0) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 38: Lce-Last Serial Command Error

    Displays the voltage, current, and temperature status for laser diode 14. (Read-only) — Examples Display the information for the laser diode bank 1: (LDI+LD1) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 39: Let-Lens Type

    Adjust the horizontal location of the lens left 20 steps: (LHL 20) Adjust the horizontal location of the lens left 70 steps: (LHL 70) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 40: Lhr-Lens Shift Right

    Saves the current lens position to the projector memory. Commands Command Description Values LMS <value> Saves the current lens position to the projector memory. 0 to 4 DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 41: Loc-Localization Language

    Sets the signal level for lights out for the RealBlack feature. Commands Command Description Values LOL <value> Sets the lights out signal level. 0 to 5 0 (Default) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 42: Lot-Lights Out Timer

    Examples Maintain the light source with 50% brightness for as long as possible: (LPM 3) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 43: Lpp-Constant Power

    Set the first frame from the input source as the left reference: (LRR 0) Set the field GPIO of the input source as the left and right reference: (LRR 1) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 44: Lse-Last System Error

    Adjusts the vertical location of the lens up. 0 to 100 Examples Adjust the vertical location of the lens up 30 steps: (LVU 30) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 45: Mbe-Message Box Enable

    One numeric character MDT+HPOS <value> Applies a horizontal offset. Three numeric characters MDT+RDIX <value> Sets the record index. 0 to 19 DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 46: Mif-Main (Single) Source Information

    — MIF+SYNC? Returns the sync type. (Read-only) — MIF+VREF? Returns vertical refresh information. (Read-only) — Examples Return the image resolution: (MIF+RESL?) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 47: Mnr-Mpeg Noise Reduction

    Moves the on-screen display to the left. 0 to 100 0 (Default) Examples Move the on-screen menu to the left: (MSH 0) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 48: Msv-Menu Shift Vertical

    2 = 3 minutes Examples Never make the on-screen display disappear: (MTO 0) Set the on-screen display to disappear after three minutes: (MTO 2) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 49: Mwf-Manual Warp Filter

    Modifies subnet mask settings. value = Subnet mask Examples Turn DHCP off: (NET+DHCP 1) Set the MAC address to 00:E0:47:01:02:3C: (NET+MAC0 ”00:E0:47:01:02:3C”) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 50: Ntw-Wireless Network

    Set the MAC address to 00:E0:47:01:02:3C: (NET+MAC0 ”00:E0:47:01:02:3C”) Turn the wireless LAN on: (NTW+SLCT 1) Set the subnet mask to 255.255.255.000: (NET+SUB0 ”255.255.255.000”) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 51: Osd-On Screen Display

    OST <value> Changes the transparency of the menus and messages. 0 to 90 0 (Default) Examples Turn off the transparency: (OST 0) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 52: Pcg-Change Pin

    PIF–Projector Information Displays information about the projector. This command is only available when the projector is in service mode and is read-only. DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 53: Pip-Picture In Picture

    Examples Return the state of the picture-in-picture/picture-by-picture command: (PIP?) Disable picture-in-picture/picture-by-picture video: (PIP 0) Enable picture-in-picture/picture-by-picture video: (PIP 1) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 54: Piv-Pin Protect

    6 = Places the picture-in-picture image on the top left of the main image 7 = Places the picture-in-picture image on the top right of the main image DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 55: Pps-Picture-In-Picture/Picture-By-Picture Swap

    PST+USER <value> Stores the current settings to a user profile. — Examples Optimize the projector for bright viewing content: (PST 1) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 56: Pwr-Power

    The Pixel Phase command can only be set on analog input cards. Commands Command Description Values PXP <value> Sets the pixel phase for the specified value. 0 to 100 50 (Default) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 57: Rlc-Light Sensor Calibration

    ROG <value> Sets the red gain value. 0 to 100 50 (Default) Examples Set the red gain value to 50: (ROG 50) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 58: Roo-Red Offset

    Enable the status LED so it is always on: (SBL 0) Turn on the status LED only for warnings and errors: (SBL 2) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 59: Scr-Skin Color

    1 = Turns on the serial port character echo Examples Disable the serial port character echo: (SEC 0) Turn on the serial port character echo: (SEC 1) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 60: Shu-Shutter

    — SIF+RESL? Returns the resolution. (Read-only) — SIF+SGFT? Returns the signal format. (Read-only) — SIF+SYNC? Returns the sync type. (Read-only) — DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 61: Sin-Select Input

    (SIN+PIIP 8) SIV–Serial Command Version Displays the serial command version. Commands Command Description Values SIV? Displays the serial command version. (Read-only) — DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 62: Sks-Source Key Function Settings

    3 = 6 hours Examples Turn off the sleep timer: (SLP 0) Set the sleep timer duration to 4 hours: (SLP 2) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 63: Sns-Source Name Setting

    0 = Turns off rear projection (Default) 1 = Turns on rear projection Examples Turn off rear projection: (SOR 0) Turn on rear projection: (SOR 1) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 64: Sos-3D Sync Out

    Examples Slowly correct the light source: (SPD 1) Correct the light source more aggressively: (SPD 14) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 65: Spp-Serial Port Path

    3 = White screen Examples Set the splash screen to blue: (SPS+SLCT 1) Set the splash screen to the factory logo: (SPS+SLCT 0) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 66: Sst-Projector Status

    Values SYT <value> Sets the sync threshold. 0 to 100 50 (Default) Examples Set the sync threshold to 50: (SYT 50) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 67: Szp-Size Presets

    1 = Frame Packing 2 = Side by Side 3 = Top and Bottom 4 = Frame Sequential 5 = Off DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 68: Tdi-3D Invert

    1 = Applies low adjustment for removing noise 2 = Applies middle adjustment for removing noise 3 = Applies high adjustment for removing noise DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 69: Tnt-Tint

    Corrects the distortion created when the top and bottom sides of the image bend inwards to the center of the display. If a DPWM is installed use the pincushion/barrel function for adjustments. DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 70: Vrt-Vertical Position

    VTT <0 | 1> Enables or disables the 12V trigger. 0 = Disables the 12V trigger (Default) 1 = Enables the 12V trigger DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 71: Wap-Apply Warp Settings

    0 to 3 = Saves geometry correction to one warping and blending. of five warp settings 0 (Default) Examples Save the geometry correction to warp setting #3: DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 72: Wpk-White Peaking

    Resets the geometry correction. Commands Command Description Values WRE 1 Resets the geometry correction. Examples Reset the geometry correction: (WRE 1) DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 73: Wrp-Geometry Correction

    Description Values ZOM <value> Increases or decreases the zoom. n = Increases zoom by one p = Decreases zoom by one DWU1612-HS/DWU2022-HS Technical Reference–Serial Commands 020-103352-01 Rev. 1 (03-2020) Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 74 Corporate offi ces Worldwide offi ces Christie Digital Systems USA, Inc. Africa United Kingdom Columbia Korea (Seoul) ph: 714 236 8610 ph: +27 (0)11 510 0094 ph: +44 (0) 118 977 8000 ph: +57 (318) 447 3179 ph: +82 2 702 1601 Christie Digital Systems Canada Inc.

This manual is also suitable for:

Dwu2022-hs

Table of Contents