Christie HS 2K Series Service Manual page 77

See Removing the top cover
2. Remove the main board module.
See Replacing the main board
3. Remove the main board bottom shielding.
See Removing the rear cover
4. Remove the rear cover.
See Removing the rear cover
5. Remove the front cover.
See Removing the front cover
6. Remove the left-side cover.
See Removing the left-side cover
7. Remove the shielding cover on the left of the power supply.
See Replacing the DC 12V power supply
8. Remove the AC inlet harnesses from the clips.
9. Remove the 3M tapes on the cable.
10. Remove the six M3 screws with a Phillips #1 screwdriver.
11. Take out the main power supply from the shielding cover.
12. Unplug the four connectors.
LVPS/MB0
HS Series 2K Service Manual—DWU1612-HS,DWU2022-HS
020-001790-01 Rev. 1 (03-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
on page 59.
on page 94.
on page 59.
on page 59.
on page 61.
on page 63.
on page 74.
LVPS/B1
LVPS/B2
Electronics
LVPS/R
77