Verify Power Connection - Christie H Series Service Manual

Verify power connection

Verify power
connection.
Is the power cord connected
securely at the projector and at
the power source ?
Yes
Is the power source providing
AC voltage?
Yes
Is the interlock switch closed?
Yes
Measure the voltage of J2, pins 1
13, and 15. Is the output 5V?
Yes
Replace the main board and the
keypad board.
No fault found
H Series Service Manual
020-000802-03 Rev. 1 (12-2016)
No
No
No
No
End
Properly connect the power cord at
The projector and AC power source
Supply AC voltage (100-120V or
200-240V)
Ensure the interlock switch is in the
closed position
Replace the LVPS
Troubleshooting
No
34