Verify Power Connection - Christie DHD410S Service Manual

Verify power connection

Verify power
connection.
Is the power cord connected
securely at the projector and at
the power source ?
Yes
Is the power source providing
AC voltage?
Yes
Is the top cover securely in
place and properly fastened?
Yes
Measure the J1 pin5 on the main
board is output 5V?
Yes
Replace the main board and the
keypad board.
No fault found
DHD410S Service Manual
020-001481-01 Rev. 1 (10-2018)
No
No
No
No
End
Properly connect the power cord at
The projector and AC power source
Supply AC voltage (100-120V or
200-240V)
Ensure the top cover is in the
closed position
Replace the LVPS
Troubleshooting
No
34