Network Tools - Cabletron Systems 2H28-08R User Manual

Chapter 5: Local Management
5.21

NETWORK TOOLS

The Network Tools function allows the user to access and manage
network devices.
To access the Network Tools screen, use the arrow keys to highlight the
NETWORK TOOLS menu item in the Device Menu screen and press
ENTER. The Network Tools screen displays.
Welcome to Network Tools
-> help
Commands Available to the User:
Built in Commands:
arp bridge
netstat ping
show traceroute
soft_reset telnet
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
For help with a specific command, type 'help <command>'.
->
The Network Tools functions are performed using a series of commands.
Entering commands in Network Tools involves typing the command to be
executed at the Network Tools prompt, adding any desired or required
extensions, and pressing ENTER.
There are three categories of commands in the command set:
• Built-in Commands – Allow the user to access and manage network
devices. The commands are: arp, bridge, defroute, netstat, ping,
reset, show, traceroute, soft_reset, telnet, and link_trap.
• Special Commands – Allow the user to exit from Network Tools. The
commands are done, exit, and quit.
5-72
Figure 5-27 shows the Network Tools Help screen.
defroute
reset
link_trap
Figure 5-27 Network Tools Screen
2H28-08R SmartSwitch 2208 User's Guide
22511-75