Network Tools - Cabletron Systems SmartSwitch 8H02-16 User Manual

Chapter 6: Local Management
6.21

NETWORK TOOLS

The Network Tools function, shown in Figure 6-21, resides on the
8H02-16 and allows the user to access and manage network devices.
Access the Network Tools screen by using the arrow keys to highlight the
Network Tools option on the Device Menu screen and pressing ENTER.
The Network Tools screen appears.
Welcome to Network Tools
NetTools-> help
bridge
arp
netstat ping
show traceroute
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
For help with a specific command, type 'help <command>'.
NetTools->
The Network Tools functions are performed using a series of commands.
Entering commands in Network Tools involves typing the command to be
executed at the Network Tools prompt, adding any desired or required
extensions, and pressing ENTER.
There are two categories of commands in the command set.
• Built-in Commands - Allow the user to access and manage network
devices. The commands are: arp, bridge, defroute, netstat, ping,
reset, show, and traceroute.
• Special Commands - Allow the user to exit from Network Tools. The
commands are done, exit, and quit.
6-58
defroute
reset
Figure 6-21 Network Tools Help Screen
8H02-16 User's Guide
090829