Switch Configuration Screen - Cabletron Systems 2H28-08R User Manual

Chapter 5: Local Management
5.10

SWITCH CONFIGURATION SCREEN

The Switch Configuration screen will not be available if the
NOTE
operational mode of the module has been set to SECURE
FAST VLAN. This screen may only be used by modules
configured to operate as traditional or 802.1Q switches.
The Switch Configuration screen,
options to make a switch operational in your network.
To access the Switch Configuration screen from the Device Configuration
Menu screen, use the arrow keys to highlight the SWITCH
CONFIGURATION menu item and press ENTER. The Switch
Configuration screen displays showing Ports 1 through 6. The optional
ports, 7 and 8, will display also if Fast Ethernet Interface Modules are
installed.
Event Message Line
Device Type: 2H28-08R
Switch Address: 00-00-1D-00-00-00
Number of Ports:
Port #
1
2
3
4
5
6
7
8
SAVE
5-36
2H28-08R LOCAL MANAGEMENT
Switch Configuration
8
MAC Address
00-00-1D-00-00-00
00-00-1D-00-00-01
00-00-1D-00-00-02
00-00-1D-00-00-03
00-00-1D-00-00-04
00-00-1D-00-00-05
00-00-1D-00-00-06
00-00-1D-00-00-07
Figure 5-16 Switch Configuration Screen
2H28-08R SmartSwitch 2208 User's Guide
Figure 5-16, provides the basic setup
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Type of STA:
Age Time (sec):
State
learning
disabled
blocking
disabled
listening
disabled
forwarding
forwarding
EXIT
XX.XX.XX
[DEC]
300
Status
[ENABLED]
[DISABLED]
[ENABLED]
[DISABLED]
[ENABLED]
[DISABLED]
[ENABLED]
[ENABLED]
RETURN
2286-18