Cabletron Systems 2H28-08R User Manual page 31

Installation
Rack mounting the 2H28-08R involves the following:
• Attaching the strain-relief bracket
• Rack mounting the 2H28-08R (attaching the mounting brackets and
fastening the 2H28-08R to the rack)
Attaching the Strain-Relief Bracket
Use of the strain-relief bracket is optional, but recommended in order to
reduce cable damage and maintain an orderly environment.
Attach the strain-relief bracket to the front of the 2H28-08R as follows:
1. Locate the strain-relief bracket and four 8-32 x 5/16-inch pan-head
screws in the rackmount kit.
Do not attempt to attach the strain-relief bracket with screws
!
other than the 8-32 x 5/16-inch screws included with the
CAUTION
2H28-08R. Use of longer screws may damage the unit.
2. Attach the strain-relief bracket to the bottom of the 2H28-08R using
the four 8-32 x 5/16-inch pan-head screws
6
Figure 3-2 Attaching the Strain-Relief Bracket
2H28-08R SmartSwitch 2208 User's Guide
Screws (4)
Strain-Relief Bracket
5 2 ENET
12
4 ENET
12
(Figure
1 ENET
CPU
PWR
1 LINK 1 LINK
12
3 ENET
1 LINK 12 1 LINK
Installing the 2H28-08R
3-2).
COM
2E43-51
RESET
E2 E1
E4 E3
2251-47
3-5