Network Tools - Cabletron Systems 2E48-27R User Manual

5.23

NETWORK TOOLS

The Network Tools function allows the user to access and manage
network devices.
To access the Network Tools screen, use the arrow keys to highlight the
NETWORK TOOLS menu item in the Device Menu screen and press
ENTER. The Network Tools Help screen displays.
Welcome to Network Tools
-> help
Commands Available to User
Built in Commands:
bridge
arp
netstat ping
show traceroute
telnet
soft_reset
atm_stp_state
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
For help with a specific command, type 'help <command>'.
->
The Network Tools functions are performed using a series of commands.
Entering commands in Network Tools involves typing the command to be
executed at the Network Tools prompt, adding any desired or required
extensions, and pressing ENTER.
Type help at the prompt to list all the commands that are
available for the device in the current operational mode. A
TIP
command used incorrectly (wrong syntax) will prompt a display
of the correct usage. Use lower case characters when entering
commands in Network Tools.
2E48-27R/2E49-27R User's Guide
Figure 5-31 shows the Network Tools Help screen.
defroute
reset
link_trap
Figure 5-31 Network Tools Help Screen
Network Tools
09081-29
5-79