Cabletron Systems 2H28-08R User Manual page 123

Example:
bridge:
Syntax:
Description:
Options:
Example:
2H28-08R SmartSwitch 2208 User's Guide
-> arp -a
# Interface Network Address
# (SonicInt) 122.144.40.111
# (SonicInt) 122.144.48.109
# (SonicInt) 122.144.52.68
# (SonicInt) 122.144.21.43
-> arp -d 1 122.144.52.68
-> arp -s 1 22.44.2.3 00:00:0e:03:1d:3c
-> arp -f
bridge [ENABLE/DISABLE] [IFNUM/ALL]
The bridge command allows bridge
management to be enabled or disabled at the
user's request, either one at a time or all at once.
Specifying a single interface number will affect
the bridging status of that interface, while
specifying ALL will affect every interface.
Not Applicable
-> bridge disable all
-> bridge enable 1
-> bridge disable 1
Network Tools
Media Type
Physical Address
3(dynamic)
00.00.0e.12.3c.04
3(dynamic)
00.00.0e.f3.3d.14
3(dynamic)
00.00.0e.12.3c.04
3(dynamic)
00.00.0e.03.1d.3c
05141-67
05141-68
5-75