Network Tools - Cabletron Systems 2E43-51 User Manual

5.26

NETWORK TOOLS

The Network Tools function allows the user to access and manage
network devices.
To access the Network Tools screen, use the arrow keys to highlight the
NETWORK TOOLS menu item in the Device Menu screen and press
ENTER. The Network Tools screen displays.
Welcome to Network Tools
-> help
Commands Available to User
Built in Commands:
bridge
arp
netstat ping
show traceroute
telnet
soft_reset
atm_stp_state
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
For help with a specific command, type 'help <command>'.
->
The Network Tools functions are performed using a series of commands.
Entering commands in Network Tools involves typing the command to be
executed at the Network Tools prompt, adding any desired or required
extensions, and pressing ENTER.
There are two categories of commands in the command set.
• Built-in Commands – Allow the user to access and manage network
devices. The commands are arp, bridge, defroute, netstat, ping,
reset, show, traceroute, soft-reset, telnet, link_trap, and
atm_stp_state.
2E43-51/2E43-51R User's Guide
Figure 5-33 shows the Network Tools Help screen.
defroute
reset
link_trap
Figure 5-33 Network Tools Screen
Network Tools
090829
5-85