Cabletron Systems 2H28-08R User Manual page 126

Chapter 5: Local Management
reset:
Syntax:
Description:
The Network Tools connection to the device will be terminated
upon execution of this command.
TIP
Options:
Example:
show:
Syntax:
Description:
5-78
reset
This reset command initiates a soft reset of the
device.The reset command initializes the CPU
processor, runs the onboard diagnostics, and
restarts the software image, which restores the
user configuration settings from NVRAM. The
user will be queried to confirm the reset
command to ensure against unwanted resets.
Not Applicable
-> reset
RESET: Are you *SURE*? ->Y
show [PROTOCOL] [TABLE]
The show command displays information
concerning various components of the device.
Protocols currently supported are IP, IPX,
DECnet, and AppleTalk. Components of those
protocols that are currently supported are ARP
caches, route tables, FIB tables, server tables,
and interface tables. The number of valid
entries in the table will be displayed at the end
of the table display.
2H28-08R SmartSwitch 2208 User's Guide
17421-45