Accessing Local Management - Cabletron Systems 2H28-08R User Manual

Chapter 5: Local Management
5.4

ACCESSING LOCAL MANAGEMENT

Access to Local Management is controlled through the Local
Management Password screen shown in
connection is made to the 2H28-08R, the Local Management Password
screen displays. Before continuing, the user must enter a password
(community name) which is compared to the previously stored
passwords. The level of access allowed the user depends on the password.
To set or change passwords, refer to
describe the procedure to access Local Management.
1. Turn on the terminal. Press ENTER (up to four times may be needed
to engage the autobaud capability) until the 2H28-08R Local
Management Password screen displays.
Figure 5-3 Local Management Password Screen
2. Enter the Password and press ENTER. The default super-user access
password is "public" or press ENTER.
5-8
2H28-08R LOCAL MANAGEMENT
CABLETRON Systems, Incorporated
P.O.Box 5005
Rochester, NH 03866-5005
(603) 332-9400
(c) Copyright CABLETRON Systems, Inc.
Module Serial Number:
Module Hardware Revision:
Module Firmware Revision: XX.XX.XX
Module BOOTPROM Revision: XX.XX.XX
Enter Password:
Event Message Line
2H28-08R SmartSwitch 2208 User's Guide
Figure 5-3. Whenever a
Section 5.8. The following steps
USA
1997