Using The Reset Button - Cabletron Systems 2H28-08R User Manual

Chapter 4: Troubleshooting
4.4

USING THE RESET BUTTON

The RESET button, shown in
without affecting the NVRAM.
Pressing the RESET button resets the device, and all switching
!
being performed by the device is halted for approximately two
CAUTION
minutes.
To reset the 2H28-08R processor, press and release the RESET button. A
non-conductive tool is recommended for use in pushing the recessed
button. The 2H28-08R goes through a reset process for approximately
45 seconds. The 2H28-08R may be unreachable for a short time as it
reenters the network.
4-6
Figure
RESET Button
Figure 4-3 RESET Button
2H28-08R SmartSwitch 2208 User's Guide
4-3, resets the 2H28-08R processor
2380_03