Using The Clear Counters Command; Network Tools - Cabletron Systems 2H23-50R User Manual

Chapter 5: Local Management

5.26.3 Using the Clear Counters Command

To reset all the statistics counters of the selected port to zero, perform the
following steps:
1. Use the arrow keys to highlight the CLEAR COUNTERS command
field at the bottom of the screen.
2. Press ENTER. The counters for the selected port are reset to zero.
5.27

NETWORK TOOLS

The Network Tools function allows the user to access and manage
network devices.
To access the Network Tools screen, use the arrow keys to highlight the
NETWORK TOOLS menu item in the Device Menu screen and press
ENTER. The Network Tools screen displays.
Welcome to Network Tools
-> help
Commands Available to User
Built in Commands:
bridge
arp
netstat ping
show traceroute
soft_reset telnet
atm_stp_state
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
For help with a specific command, type 'help <command>'.
->
The Network Tools functions are performed using a series of commands.
Entering commands in Network Tools involves typing the command to be
executed at the Network Tools prompt, adding any desired or required
extensions, and pressing ENTER.
5-96
Figure 5-34 shows the Network Tools help screen.
defroute
reset
link_trap
Figure 5-34 Network Tools Screen
2H23-50R/2H33-37R User's Guide
090829