Cabletron Systems 2H28-08R User Manual page 44

Chapter 4: Troubleshooting
The terms flashing, blinking, and solid used in
NOTE
indicate the following:
Flashing indicates an LED pulse that is flashing at a random
rate.
Blinking indicates an LED pulse flashing at a steady rate
(50% on, 50% off).
Solid indicates a steady LED light. No pulsing.
LED Color
PWR Green
Amber
CPU Off
Red
Amber
Green
Amber
and
Green
4-2
Table 4-1 LANVIEW LEDs
State
Solid. Functional.
Power supply(ies)
operating normally.
Solid. Indicates loss of
power supply
redundancy.
Power off.
Blinking. Hardware
failure has occurred.
Solid. Resetting,
normal power up reset.
Blinking. Crippled.
Solid. Testing.
Solid. Functional.
Blinking amber and
green while booting.
2H28-08R SmartSwitch 2208 User's Guide
Table 4-1
Recommended Action
None.
1. Ensure that the power cords
are plugged in correctly and
that there is power at the
power source.
2. Contact the Cabletron
Systems Global Call Center
if problem still exists.
Power up device.
Contact the Cabletron
Systems Global Call Center.
None.
Contact the Cabletron
Systems Global Call Center.
None.
None.
None.