Using The Clear Counters Command; Interface Statistics Screen - Cabletron Systems 2H28-08R User Manual

CLEAR COUNTERS (Command)
This command is used to reset all statistics counters to zero. For details on
how to use this field, refer to

5.18.1 Using the Clear Counters Command

To reset all the statistics counters to zero, perform the following steps:
1. Use the arrow keys to highlight the CLEAR COUNTERS field.
2. Press ENTER to reset the counters for the selected port to zero.
5.19

INTERFACE STATISTICS SCREEN

The Interface Statistics screen,
statistics for all of the 2H28-08R interfaces (ports 1 through 6) and Fast
Ethernet Interface Module(s) (ports 7 and 8).
To access the Interface Statistics screen, use the arrow keys to highlight
the INTERFACE STATISTICS menu item on the Device Statistics
Menu screen and press ENTER. The Interface Statistics screen displays.
Event Message Line
Device Type: 2H28-08R
Interface: 1
InOctets:
InUnicast:
InNonUnicast:
InDiscards:
InErrors:
InUnknownProtos:
OutOctets:
OutUnicast:
OutNonUnicast:
OutDiscards:
OutErrors:
OutQLen:
Interface: [ 1 ]
2H28-08R SmartSwitch 2208 User's Guide
Section
Figure
2H28-08R LOCAL MANAGEMENT
Interface Statistics
Name: Fast Ethernet Frontpanel
7500456
6789
0
0
0
0
0
0
0
0
0
0
CLEAR COUNTERS
Figure 5-25 Interface Statistics Screen
Interface Statistics Screen
5.18.1.
5-25, is used to gather MIB-II
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Address: 00-00-1D-00-00-00
Last Change: xx days 00:00:00
Admin Status: UP
Oper Status: UP
MTU: 1514
Speed: 100000000
Link Status: LINK
Duplex Mode: 100BASE-FX
EXIT
XX.XX.XX
RETURN
2286_64
5-63